2008-04-21 | FITA Worldcup in Porec - Both winner in Compound Division shoot Beiter
Amandine Bouillot (FRA) and Sergio Pagni (ITA) won the FITA Worldcup in Porec, both using the Beiter Centralizer and Beiter Scopes.
The Italian Compound Mens Team - all three using Beiter
Centralizer and Beiter Scopes - where able to win the final as well. Congratulations to all of them!
2008-03-10 | European Indoor: 3 out of 4 Gold Medalists shoot Beiter Centralizer and Nocks
At the European Indoor Champs in Torino (Italy) 3 out of 4 titles did win using Beiter Centralizer stabilizers and Beiter nocks:
the Olympic Champion Marco Galiazzo won the Recurve
Male, while Sergio Pagni and Laura Longo won in the Compound divisions Male and Female. All three did use Beiter Centralizer and Beiter Nocks!
Marco Galiazzo uses the Beiter Plunger and the Beiter Klicker as well.
Laura and Sergio, as well as the swiss top archer Patrizio Hofer - Bronze medalist at this event! -
(displayed in the picture from right to left) use the Beiter Scope with K-Lenses. Thank you!... and keep going for Gold!!!
2007-11-30 | Archery World Cup Winner in the Compound Division are shooting Beiter Centralizer!
November 24th the Final of the FITA Archery World Cup took place in Dubai. Both winner of the Compound Division, Petra Ericsson - Sweden - and Jorge Jimenez - El Salvador, did use Beiter Centralizer stabilizer on their bows. Sofia Goncharova - Russia - last year winner and this year 2nd ranked - shoots the Beiter Centralizer, as well as the Beiter Scope Ø29 and Beiter Out Nocks for X-10. CONGRATULATIONS!!!
2007-09-12 | 11th International Indoor Tournament Nimes - Jan. 25th-27th 2008
In Nimes - South France - the 11th International Indoor Tournament will take place end of January. Many Top Archers worldwide and over 1200 archers in total will meet there. Werner Beiter will be there as well and show his latest products as well as some High Speed Films. If you have any questions about Beiter products, this will be the right time to get answers!
2007-07-11 | Archery Worldchampionships in German TV
Saturday July 14th the German TV channel (on Digital SAT) n-tv will show the Final Match of the Team event of the Archery World Championships in Leipzig, at 15:30 CET.
2007-02-13 | Beiter Hit Miss at the BUTC 2007
It is already the 3rd time that the Final of the British University Championships (BUTC) will be shot on Beiter Hit-Miss Targets. This years tournament will be held Saturday March 3rd at the University of Edinburgh. More details on following Link.
Werner Beiter developed the Beiter Hit-Miss System to be able to promote archery better, to make it more interesting for media and spectator. The Beiter Hit-Miss System will be available in the near future. Some more information can be downloaded.
2006-11-24 | Werner Beiter at the International Tournament in Nimes with a testing-area
Werner Beiter will be present in Nimes (F) at the 10th edition of the International Indoor Archery Tournament with a booth, where 700-900 archers and competitors are expected. It will be a test-area, where all archers may try the various technical equipment produced by Werner Beiter, such as the 3 different available Winder models, the Twister, the Tri-Liner,
the Distance-Holder, the Limb-Line-Gauges. Werner Beiter will also present some interesting news as well as some unreleased High-Speed footage!
2006-01-30 | Werner Beiter in the Swiss TV (SF2)
February 12th 2006 by SF2 (2nd Swiss Television) and January 1st 2007 by VOX the reportage "Der Flug des Pfeils:
Bogenschiessen" ("The Arrow Flight: Archery") has been broadcasted.
Among others the author, Kurt Widmer, co-operated with Werner Beiter
and stated: "...what you can see in 1/6000 of second: fine tuning with
the HighSpeed camera for archers and material in Germany..." "...The
enthusiasm for the detail. When the archery elite tries to check and
optimize material and technique, there is no other option then
the Technotemple of Werner Beiter, an archery enthusiast inventor..."
If you want more details click on this Link (German): www.nzz-format.ch
(Source for foto and text: NZZ Format)
2005-11-20 | Friends at the Beiter Werner & Iris Center
Tom Dielen, General Secretary of FITA, and his wife Nathalie -
Swiss Champion in the Recurve division -
visited the Beiter Werner & Iris Center together with the FITA
Event Manager and Top Level Coach Juan Carlos Holgado, as well as
Top German Archers Wiebke Nulle and Anja Hitzler.
The three ladies started their physical preparation for the next outdoor season,
coached by their personal fitness coach Juan Carlos Holgado. Tom Dielen had time to combine a visit to his
friend Werner Beiter and his favourite hobby: Archery!
2005-06-26 | FITA WC in Madrid: Team-Gold with Beiter Scope and Beiter Centralizer
France on Top at the FITA WC in Madrid with the Ladies Compound Team!
The whole team used Beiter Scopes and BeiterCentralizer, as well as Beiter Nocks.
Gratulation to Valerié Fabre, Cecile Jousselin, Anne-Marie Bloch and Francoise Volle!
2008-02-25 | Sight Tunnel diam. 12 - New Inserts!
Werner Beiter now offers his Sight Tunnel diam. 12 also with an new Insert Line, caled Frame Kit, featuring holes in 5 different diameters, to adapt the view of the target to the different distances. The hole-diameters are 3,0, 4,5, 6,0, 7,5 and 9,0. The Frame Kit Inserts are available in Red, Black and Clear.
2008-01-26 | Beiter Centralizer All Black Limited Edition
A new colour is available for the Beiter Centralizer: the ALL BLACK LIMITED EDITION.
This colour combination is available only as a Kit consisting out of a Long Rod, 2 Side Rods, 1 Extender and one V-Bar 90°x0°!
You can choose the lenghts of the Stabilizer, you can choose the amount of Tuner (3 or 4 on the Long Rod, 1 or none on the Extender or Side Rods) and you can decide to have an Endcap or a Weightadapter.
Go and visit your local Beiter Dealer for more details!
2007-12-20 | Beiter Rip-Clutch
The Beiter RIP-CLUTCH is a new Bow-Holder or Bow-Vise, for shops, clubs or archers.
It is the first product of a new product line that Werner Beiter has developed and will be presented in the next months to the public. The Beiter RIP-CLUTCH is available immediately!
The Beiter RIP-CLUTCH with ADAPTER 5/16“ – as displayed in the picture – can among others be used by archers at home or in their own workshop.
The Rip-Clutch can easily be fixed with 2 screws and start working on your bow!
Serving a string, installing a peep, mounting your rest and plunger, aligning your sight everything is easier with two free hands!
Not only: adjusting the center-shot or calibrating your level will also be much easier in future.
Great for Clubs, Shops and Shooting Centers: Beginner-bows, Recurveas and Compound can be stored in an optimal way!
Ask your Beiter Dealer for the new Beiter RIP-CLUTCH! Available now!
2007-11-28 | Beiter PinOut-Nock
Finally all PinOut Nocks actually planned are available: so at the moment Werner Beiter offers PinOut Nocks for all X-10 pins and Nano XR PRO 900 (145 series), X-10 Pro Tour pins and for Nano XR PRO 500 and 550 (150 series), Nano XR Pin #1 - blue - and Nano XR PRO 400 and 450 (154 series), Nano XR Pin #2 - red - and Nano XR PRO from 600-800 (149 series).
Ask your local Beiter dealer for availability!
2007-08-23 | String Tool & Tool Clip
The Beiter Clip Tool can be easily fixed on the quiver or on a belt or everywhere needed: it holds the Beiter String Tool in place and ready to use. No search for use anymore: the Tool Clip is there when you need it!
Available at your local Beiter dealer.
2007-07-26 | Beiter PinOut-Nock
After the Insert-Nock, the Out-Nock and the InOut-Nock Werner Beiter now developed the first PinOut-Nock!
The PinOut-Nock as well as the InOut-Nock preserves the end of the shaft with the outer diameter. Both inner diameters do fit the Pin.
The Beiter PinOut-Nock will be available in different sizes for the Pro-Tour Pin, the X-10 Pin and the Nano-XR Pins. The first sizes and colours will start to be available within the next weeks at your local Beiter dealer. The first available PinOut-Nock will be the Hunter (symmetric) model for the Pro-Tour Pin. Other sizes and models will follow.
2007-07-01 | Beiter Merchandising - Base Cap
Two new Beiter Base Caps are available in new trendy colour-combinations: Blue-Navy and Yellow-Navy.
Still available the Beanie-Hat, the short and longsleeve Shirts as well as the Polos.
2007-02-05 | Navigator Full Metal Jacket - Beiter In-Out Nocks
As far as we were able to measure and check the new Easton Navigator Full Metal Jacket Shafts, the Beiter In-Out Nock for the respective Navigator shaft will work. So for example a 2-95X1, 2-95X2 or 2-95XH will work on a Navigator FMJ 400 to 570 a 2-65X1,2-65X2 or 2-65XH on Navigator FMJ 630-770.
For further details please contact your Beiter Dealer!
2007-01-02 | Beiter String Tool
The Beiter String-Tool is a Multi-Purpose-Tool for many different works, not only on your strings and can be used like a finger-nail! Basically you can: split a string to be able to install a Peep-Sight; easily count the number of strands of your string; determine the middle of the string by taking over with the second String-Tool as many strands needed to be able to install the Peep-Sight in the center of your string; you can start a serving extremely fast and easy; serve a Beiter nocking point easier, defining the correct starting position; use the String-Tool as a shaver to take off a rest or glue from your bow!
The Beiter Strin-Tool is sold in pairs or as single part together with a handy holster, called Tool Clip.
2006-12-06 | Beiter Hunter Nock 2216H for Fat Boy
Beiter Insert Nocks can be installed directly in many arrow shafts on the market. The Beiter Nock 2216 Hunter
for example fits directly into FAT BOY shafts (without Bushing!).
An eventual gap caused by the differing shaft diameters can easily be closed with a small piece of teflon tape. You can find the correct nock for almost all shafts on the market with our Nock-Search.
2006-07-26 | Scope Ø39 - Crosshair
Werner Beiter adds one more option to the Scope Ø39: a Crosshair!
As all
Beiter accessories, also the Crosshair 0,35mm can be used in any existing Beiter
Scope Ø39.
The new Crosshair 0,35mm is extremely fine and thin; it can be used with or
without Lens!
2006-07-24 | Distance Holder
The Beiter Distance Holder is a tool to separate string and cable of a
Compound Bow, to allow or simplify specific works to be done, such as
re-serving a string or cable or to fix a nocking point or peep sight...
The biggest advantages toward similar products are, that on one hand it
is smaller and on the other hand the cable guard is not an obstacle,
but is eventually part of the use.
2006-07-04 | Winder with Steel Knobs
Starting from July 1st all Beiter Winder and Winder Profi
Series - will be equipped with Steel Knobs on the Spindle,... without
any price change!
Furthermore the Beiter Winder Profi X-Heavy has been introduced, which is a real heavy weight, thanks to a 60% heavier spindle.
2006-06-19 | Beiter Merchandising - T-Shirt
If you shoot Beiter products and want to show other people that you are
happy and satisfied with it, than you have to wear the new T-Shirt in
the typical Beiter colour combination royal-blue and yellow.
Available sizes: S - M - L - XL - XXL
2006-04-26 | Beiter Merchandising - Badge
You can get the new emboridered Beiter Badge from your local Beiter dealer. You can attach it to your quiver, polo, shirt...
2006-02-15 | Beiter Plunger - New Colour
Werner Beiter introduces a new, sixth colour for his Plunger: DARKBLUE!
The darkblue Plunger will first be available only in the models 6523.0
(17.5-23.0 mm) and 6529.5 (25.5-29.5mm). If the interest in this colour
will be high enough, we will think on offering all lengths.
2006-02-14 | Clearance Star for Navigator
The Clearance Star became popular within a short period of time.
Werner Beiter reacted now very fast on the request to have a Beiter
Clearance Star also for Navigator arrow shafts, introducing the
Clearance Star for Navigator 540, 610 and 710.
The Navigator size 1000 is already covered by the Clearance Star Ø5,2 fitting ACE's.
2006-02-14 | Nock 3,98 Hunter
The Beiter Nock 3,98 – e.g. for Cartel Triple shafts – is now available not only in
the asymmetric versions #1 and #2 but also in the Hunter (symmetric) version.
2006-01-10 | Beiter Merchandising
It is cold,...
it is raining,...
and you have to shoot!
Than you have to wear the right hardware: the Beiter Hat!
Available in Royal-Blue with Yellow Beiter Logo on the front.
2005-12-20 | Beiter Clearance Star - Instructions
Instructions for the Beiter Clearance Star can be downloaded in
PDF-format in several languages: for example English, French, Italian.
2005-11-16 | Beiter Clearance Star
Archers do have many questions:
"Do I have a good clearance?"
"How does my arrow leaves the bow?"
"Does my arrow touches the rest, the plunger, the handle or even my hand?"
Without High-Speed Films it is not easy to get those answers!
Beiter Clearance Stars are contact indicators, showing where the arrow
touches the bow and accessories attached to it (such as Plunger,
Rest...) on leaving the bow window after the release.
2005-11-10 | Centralizer - Hood
The Beiter Centralizer Hood is now available in all colours used for
the Centralizer Stabilizer series, also in the new "Graphite", "Lime"
and "Rosé" colours!!
By using the Beiter Hood an archer covers the thread of the Weight Adapter of his Beiter Centralizer, not allowing
getting dirty, preserving the archer and the floor from scratches.
2005-10-20 | Beiter Centralizer "Black Graphite"
"Black
Pearl", "Black Oyster", "Lime" and "Rosé" - after the four already
known perlescent colours we are glad to announce a new, fifth perlescent colour:
"Black Graphite"!
It is available for all Centralizer models and it is a combination out
of black center parts and graphite-coloured, perlescent covers.
Visit your Beiter Dealer to see this new colour!
2005-09-30 | Scope Ø39 with Blue Level
Beside the green and the red level the Beiter Scope Ø39 is now
available also with a blue level! Due to the fact that the level is
easily exchangeable, the blue level will surely become a highly
demanded accessory for the Beiter Scope Ø39, especially if different
light conditions makes it difficult to see certain colours. Try it out!
You can order your new Beiter Scope Ø39 equipped with the blue level
from factory, or simply buy it for your own Beiter Scope after-sales.
2005-08-29 | Centralizer
The Beiter Centralizer is now available in 2 new colours: "Rosé" and "Lime".
These two new colour combinations will be a high-light on the archery fields!
"Rosé" is a combination of Black center parts and Light-Red-Perlescent
covers, "Lime" has Black center parts and Light-Green-Perlescent covers.
You have to go to your Beiter dealer and see these colours… they can’t be described properly!
2005-04-04 | Insert Nock 19/2 Long
The Beiter Insert Nock 19/2 L (=LONG) is 5mm longer as the Standard
Insert Nock 19/2 and therefor euseful for finger shooters using thicker
aluminium arrow shafts.
Due to this difference an eventual contact during the release between
the fingers and the shaft should be eliminated: the arrow shaft has a
diameter up to 9,3mm, the Nock approx. 7,3mm. This difference is
normally bridged with a Bushing (Super Uni Bushing), but the fingers do
need space to open to release the string!
Many finger shooters worldwide prefer in any case to shoot Beiter
Direct-Insert-Nocks (e.g. 2114, 2312, 2315...) cause these are longer
than Super-Uni-Bushing nocks.
With the Beiter Insert Nock 19/2 L it is also possible to reach a longer draw-length, if your arrow is oot short.
The Beiter Insert Nock 19/2 L is actually available only in following
colours: #10 Fluorescent Red, #20 Fluorescent Green, #30 Flor. Orange.
2005-03-15 | InOut-Nock for Navigator
The Beiter In-Out Nock is very much appreciated world-wide, because of
the unique system of preserving the shaft end from deformation and
eventually also damage.
Therefore the Beiter In-Out Nock becomes interesting especially for
Archers trying to save money and still demanding the highest precision.
Now we offer you Beiter In-Out Nocks for Navigator- and Expert-Shafts
with both Beiter nock styles, the patented asymmetric (nock throat size
#1 and #2) and the symmetric (Hunter).
The sizes 2-65X1, 2-65X2 and 2-65XH (for Navigator 710 and 610 or Xpert
900, 820, 740, 660) and 2-95X1, 2-95X2 and 2-95XH (for Navigator
540, 480 and 430 or Xpert 580, 520) are available in following colours:
#21 Yellow, #35 Heavy Orange, #45 Heavy Blue, #57 Heavy Green, #61
Black and #71 White
Please note! For the Navigator sizes 810, 880, 1000 and Xpert 1040, 980
the In-Out Nocks for ACE (2X1S, 2X2S, 2X1L, 2X2L, 2X2H) will fit!
2005-02-22 | DVD-R - The Way to the Center
Since many years the High Speed Film of Werner Beiter „The Way to the Center“ is known world-wide.
It is now available not only as VHS cassette but also as DVD (DVD-R) with Regional Code #2.
2005-01-06 | Extender 1 1/4"
The Beiter Centralizer Extender 1 ¼“ is an Extender,...but on the other side it is not!
Once mounted the Beiter Centralizer Extender 1 ¼” - which is mainly
made out of a steel thread covered with a polymere structure- stays fix
on the bow and offers always the same positioning of the Beiter V-Bar.
On bows with steel bushings and a nut (like some Win&Win bows) it
avoids to damage the O-Ring of the Centralizer because it only has to
be mounted once!
It is available in Black or Blue.
2004-12-10 | O-Ring 1/8x2
The Beiter O-Ring 1/8X2 avoids the Sight Block to get loose e.g. on Sure Loc Sights.
If the Sight Block (with or without 3rd axis block) is not firmly
blocked and gets loose it provides high vibrations to the Sight and may
damage the Scope body; we call it the “whip”-effect!
Simply use the Beiter O-Ring and tighten the Sight Block! It won’t loose again!
2004-11-30 | Insert Nock 5,19/2
The Beiter Insert Nocke 5,19/2 is available to fit e.g. Easton Axis
shafts or other shafts with inner diameter 5,19mm. This nock is
available in following colours: Fl. Red #10, Fl. Green #20, Fl. Orange
#30.
Product news
